1  Preliminaries

1.1 Why Python?

1.1.1 Python is easy to learn and use

1.1.2 Python is easy to read

1.1.3 Python Community is mature and supportive

1.2 Hello world!

1.2.1 Setup the Python environment

In this section we are going to setup the Python developing environment.

1.2.1.1 VS Code + Anaconda

Click Appendix A.1 to see the detailed steps for VS Code and Anaconda. You may also check out the official document. It contains more features but less details.

We will talk about the relation between Python and Anaconda and more about packages sometime later.

1.2.1.2 Google Colab

Click Appendix A.2 for more details.

1.2.2 Hello World!

Take VS Code as an example. In the editor window, type in the code, and run the file in the interactive window.

print('Hello World!')

If you see a small green check mark in the interactive window and also the output Hello World!, you are good to go!

1.2.3 Python code cells and Notebooks

In VS Code you can run codes cell by cell. Each cell is separated by the symbol # %%. Each cell may contain multiple lines. You may click the small button on top of the cell or use keybindings.

This feature actually mimic the notebook. We may start a real Python Notebook file by directly creating a file with extension .ipynb.

The layout is straightforward.

1.2.4 Linters

1.2.5 IPython and Jupyter

1.3 Projects

Exercise 1.1 (Hello world!) Please set up a Python developing environment, including for .py file and for notebook, that will be used across the semester. Then print Hello World!.

Exercise 1.2 (Define a function and play with time) Please play with the following codes in a Jupyter notebook. We haven’t talked about any of them right now. Try to guess what they do and write your guess in markdown cells.

import time

def multistr(x, n=2):
    return x * n

t0 = time.time()
x = 'Python'
print(multistr(x, n=10))
t1 = time.time()
print("Time used: ", t1-t0)

Exercise 1.3 (Fancy Basketball plot) Here is an example of the data analysis. We pull data from a dataset, filter the data according to our needs and plot it to visualize the data. This is just a show case. You are encouraged to play the code, make tweaks and see what would happen. You don’t have to turn in anything.

The data we choose is Stephen Curry’s shots data in 2021-2022 regular season. First we need to load the data. The data is obtained from nba.com using nba_api.

from nba_api.stats.static import players
from nba_api.stats.endpoints import shotchartdetail
player_dict = players.get_players()

The shots data we need is in shotchartdetail. However to use it we need to know the id of Stephen Curry using the dataset player_dict.

for player in player_dict:
    if player['full_name'] == 'Stephen Curry':
        print(player['id'])
201939

So the id of Stephen Curry is 201939. Let’s pull out his shots data in 2021-2022 season.

results = shotchartdetail.ShotChartDetail(
            team_id = 0,
            player_id = 201939,
            context_measure_simple = 'FGA',
            season_nullable = '2021-22',
            season_type_all_star = 'Regular Season')
df = results.get_data_frames()[0]
df.head()
GRID_TYPE GAME_ID GAME_EVENT_ID PLAYER_ID PLAYER_NAME TEAM_ID TEAM_NAME PERIOD MINUTES_REMAINING SECONDS_REMAINING ... SHOT_ZONE_AREA SHOT_ZONE_RANGE SHOT_DISTANCE LOC_X LOC_Y SHOT_ATTEMPTED_FLAG SHOT_MADE_FLAG GAME_DATE HTM VTM
0 Shot Chart Detail 0022100002 26 201939 Stephen Curry 1610612744 Golden State Warriors 1 10 9 ... Left Side Center(LC) 24+ ft. 28 -109 260 1 0 20211019 LAL GSW
1 Shot Chart Detail 0022100002 34 201939 Stephen Curry 1610612744 Golden State Warriors 1 9 41 ... Center(C) 24+ ft. 26 48 257 1 0 20211019 LAL GSW
2 Shot Chart Detail 0022100002 37 201939 Stephen Curry 1610612744 Golden State Warriors 1 9 10 ... Left Side Center(LC) 24+ ft. 25 -165 189 1 1 20211019 LAL GSW
3 Shot Chart Detail 0022100002 75 201939 Stephen Curry 1610612744 Golden State Warriors 1 6 17 ... Center(C) Less Than 8 ft. 1 -13 12 1 0 20211019 LAL GSW
4 Shot Chart Detail 0022100002 130 201939 Stephen Curry 1610612744 Golden State Warriors 1 3 11 ... Center(C) Less Than 8 ft. 2 -15 22 1 0 20211019 LAL GSW

5 rows × 24 columns

df is the results we get in terms of a DataFrame, and we show the first 5 records as an example.

These are all attempts. We are interested in all made. By looking at all the columns, we find a column called SHOT_MADE_FLAG which shows what we want. Therefore we will use it to filter the records.

df_made = df[df['SHOT_MADE_FLAG']==1]
df_made.head()
GRID_TYPE GAME_ID GAME_EVENT_ID PLAYER_ID PLAYER_NAME TEAM_ID TEAM_NAME PERIOD MINUTES_REMAINING SECONDS_REMAINING ... SHOT_ZONE_AREA SHOT_ZONE_RANGE SHOT_DISTANCE LOC_X LOC_Y SHOT_ATTEMPTED_FLAG SHOT_MADE_FLAG GAME_DATE HTM VTM
2 Shot Chart Detail 0022100002 37 201939 Stephen Curry 1610612744 Golden State Warriors 1 9 10 ... Left Side Center(LC) 24+ ft. 25 -165 189 1 1 20211019 LAL GSW
6 Shot Chart Detail 0022100002 176 201939 Stephen Curry 1610612744 Golden State Warriors 1 0 27 ... Center(C) Less Than 8 ft. 2 -7 29 1 1 20211019 LAL GSW
9 Shot Chart Detail 0022100002 352 201939 Stephen Curry 1610612744 Golden State Warriors 2 1 29 ... Center(C) Less Than 8 ft. 1 -1 10 1 1 20211019 LAL GSW
16 Shot Chart Detail 0022100002 510 201939 Stephen Curry 1610612744 Golden State Warriors 3 2 23 ... Center(C) Less Than 8 ft. 1 7 8 1 1 20211019 LAL GSW
18 Shot Chart Detail 0022100002 642 201939 Stephen Curry 1610612744 Golden State Warriors 4 5 34 ... Center(C) 24+ ft. 26 48 260 1 1 20211019 LAL GSW

5 rows × 24 columns

We also notice that there are two columns LOC_X and LOC_Y shows the coordinates of the attempts. We will use it to draw the heatmap. The full code for drawing out the court draw_court is folded below. It is from Bradley Fay GitHub.

Note

Note that, although draw_cort is long, it is not hard to understand. It just draws a court piece by piece.

Code 
from matplotlib.patches import Circle, Rectangle, Arc
import matplotlib.pyplot as plt


def draw_court(ax=None, color='gray', lw=1, outer_lines=False):
    """
    Returns an axes with a basketball court drawn onto to it.

    This function draws a court based on the x and y-axis values that the NBA
    stats API provides for the shot chart data.  For example, the NBA stat API
    represents the center of the hoop at the (0,0) coordinate.  Twenty-two feet
    from the left of the center of the hoop in is represented by the (-220,0)
    coordinates.  So one foot equals +/-10 units on the x and y-axis.
    """
    if ax is None:
        ax = plt.gca()

    # Create the various parts of an NBA basketball court

    # Create the basketball hoop
    hoop = Circle((0, 0), radius=7.5, linewidth=lw, color=color, fill=False)

    # Create backboard
    backboard = Rectangle((-30, -7.5), 60, -1, linewidth=lw, color=color)

    # The paint
    # Create the outer box 0f the paint, width=16ft, height=19ft
    outer_box = Rectangle((-80, -47.5), 160, 190, linewidth=lw, color=color,
                          fill=False)
    # Create the inner box of the paint, widt=12ft, height=19ft
    inner_box = Rectangle((-60, -47.5), 120, 190, linewidth=lw, color=color,
                          fill=False)

    # Create free throw top arc
    top_free_throw = Arc((0, 142.5), 120, 120, theta1=0, theta2=180,
                         linewidth=lw, color=color, fill=False)
    # Create free throw bottom arc
    bottom_free_throw = Arc((0, 142.5), 120, 120, theta1=180, theta2=0,
                            linewidth=lw, color=color, linestyle='dashed')
    # Restricted Zone, it is an arc with 4ft radius from center of the hoop
    restricted = Arc((0, 0), 80, 80, theta1=0, theta2=180, linewidth=lw,
                     color=color)

    # Three point line
    # Create the right side 3pt lines, it's 14ft long before it arcs
    corner_three_a = Rectangle((-220, -47.5), 0, 140, linewidth=lw,
                               color=color)
    # Create the right side 3pt lines, it's 14ft long before it arcs
    corner_three_b = Rectangle((220, -47.5), 0, 140, linewidth=lw, color=color)
    # 3pt arc - center of arc will be the hoop, arc is 23'9" away from hoop
    three_arc = Arc((0, 0), 475, 475, theta1=22, theta2=158, linewidth=lw,
                    color=color)

    # Center Court
    center_outer_arc = Arc((0, 422.5), 120, 120, theta1=180, theta2=0,
                           linewidth=lw, color=color)
    center_inner_arc = Arc((0, 422.5), 40, 40, theta1=180, theta2=0,
                           linewidth=lw, color=color)

    # List of the court elements to be plotted onto the axes
    court_elements = [hoop, backboard, outer_box, inner_box, top_free_throw,
                      bottom_free_throw, restricted, corner_three_a,
                      corner_three_b, three_arc, center_outer_arc,
                      center_inner_arc]

    if outer_lines:
        # Draw the half court line, baseline and side out bound lines
        outer_lines = Rectangle((-250, -47.5), 500, 470, linewidth=lw,
                                color=color, fill=False)
        court_elements.append(outer_lines)

    # Add the court elements onto the axes
    for element in court_elements:
        ax.add_patch(element)

    return ax
# Create figure and axes
fig = plt.figure(figsize=(6, 6))
ax = fig.add_axes([0, 0, 1, 1])

# Plot hexbin of shots
ax.hexbin(df['LOC_X'], df['LOC_Y'], gridsize=(30, 30), extent=(-300, 300, 0, 940), bins='log', cmap='Blues')
ax = draw_court(ax, 'black')

# Annotate player name and season
ax.text(0, 1.05, 'Stephen Curry\n2021-22 Regular Season', transform=ax.transAxes, ha='left', va='baseline')

# Set axis limits
_ = ax.set_xlim(-250, 250)
_ = ax.set_ylim(0, 400)

Click for Hint.
Solution (Hint). 
from nba_api.stats.static import players
from nba_api.stats.endpoints import shotchartdetail
player_dict = players.get_players()

These lines import some packages and get player information and save them into player_dict.

for player in player_dict:
    if player['full_name'] == 'Stephen Curry':
        print(player['id'])

Go through all records in player_dict. If the name of a player is Stephen Curry, get his id. Then we will know the id of Stephen Curry.

To be omitted.